A Variable, Switchable, Tone/Noise Canceling Coil

*********************************************
P1 = Seymour Duncan SHPR-1 (P-Rails)

*********************************************
R1 = Volume, Audio Taper, (Shunt Circuit)
R2A, R2B = Tone, Linear Taper
R3A, R3B = Blender, Audio Taper
--- Shunt Circuit for Variable Tone/Noise Canceling Coil "TC1"
--- R3A is wired up "Clockwise"
--- R3B is wired up "Counter Clockwise"

*********************************************
TC1 = Dual, 10K Coil
--- Humbucker pickup without magnet(s).
--- It does have the "Slugs & Screws" installed

*********************************************
S1 = Coil Select
--- Single, Humbucker, Single
--- South Coil(P90), Both Coils, North Coil(Blade)
S2 = Pickup, Series-Parallel
S3 = Tone Coil, On-Off
S4 = Tone Coil, Series/Parallel

*********************************************
This setup give you 3-Pots and 4-switches.

R1 & R2 are standard pots with standard sized knobs.
S2 & S2 are large "Fat Bat" switches.

R3A&B is a Mini Pot with Mini Knob.
S3 & S4 are "Mini" toggle switches.

*********************************************