A Personal Experience: Guitar Fetish/GFS
First let me state that this is not about their "Product"
Although that is what got this all started in this in the first place.
I purchased a "Crunchy Rails" pickup from Guitar Fetish.
When it arrive, I use one of my meters to ohm it out.
My meter reading was telling me that this pickup was 15.02K
Guitar Fetish "Advertises" this pickup at, and I Quote:
"A Scorching 16.2K"
But when I emailed them about this, I get the following:
"Song and Dance"
Well, we cannot guarantee that all of our pickups will measure out exactly and that there will be some variance in coil winding
Ok !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Then "Do Not Claim" that this pickup measures in at 16.2K.
And Then Tell Me to "F'off"
And this is where I want to state:
That "Oops"
You actually have to have something called "Customer Service" before it can be called:
Abysmal, Abhor-able, Crappy, Non-Existent
---
I am not going to tell you not to buy from Guitar Fetish.
This is just a warning, that if "Shit Goes South"
GFS will "Dump You", or is that "Dump On You"
In short: Guitar Fetish = Buyer Beware
---
Both Di'Marzio and Seymour Duncan!
Do guarantee that the pickups are wound to a specific specification.
And will actually apologize for any problems you have with their product.
Now to the part that has made me "Never Want To Buy From Guitar Fetish, Ever Again".
Or in other words, it is "Worth It" to buy Name Brand Pickups from a reliable Manufacturer.
Thanks to Guitar Fetish I have gone back to buying Di'Marzio pickups.
The cost difference is not more that $20.00.
$50 to $60 for the GFS pickup
$70 to $80 for the Di'Marzio's
$80 to $100 for the Seymour Duncan's
---
And while I have several guitars that have GFS pickups in them.
I am not going to go and "Rip Them All Out"
They will all be replaced eventually.
I want to state that when they are replaced I am going to trash them.
I will not resell them, yea I know it is still money in GFS's bank account.
But the way they treated me, One less GFS pickup on the market the better.
---
This experience has lead me to believe that Guitar Fetish/GFS is nothing more that some dude or dudes.
Selling Shit from their spare bedroom., Who's only motto is:
Make A Buck, Make A Buck, Make A Buck !!!!!
And If You Are Not Happy With Us, Who Cares?
We Don't Give A Shit!
Seems that if they wanted to keep me as a "Customer"
Happy or other wise.
They could of done something other that tell me to "Foff"
---
I dug the following up from an online Thesaurus!
Non-Existent [non-ig-zis-tuhns]
Main Entry:
Absent [adj., prep. ab-suhnt; v. ab-sent, ab-suhnt]
Definition:
Make-believe, Deficient in something needed, imaginary, fictitious, invented, make-believe, fairy-tale, fictional, not real, ineffectual, valueless, unreal, fake, make-believe, hypothetical
Synonyms:
bare, blank, devoid, empty, hollow, lacking, minus, missing, omitted, unavailable, vacant, vacuous, wanting, abstract, apocryphal, apparitional, assumed, chimerical, deceptive, delusive, dreamed-up, fictional, figmental, hallucinatory, hypothetical, illusive, illusory, imagined, made-up, mythological, nonexistent, notional, phantasmal, phantasmic, quixotic, shadowy, spectral, supposed, supposititious, theoretical, unreal, unsubstantial, fabricated, false, fictitious, made-up, pretended, unreal, untrue, absent, blank, dead, defunct, departed, empty, ethereal, extinct, extinguished, few and far between, flimsy, gone, gossamery, groundless, hallucinatory, hypothetical, illusory, imaginary, imagined, immaterial, imponderable, insubstantial, lost, missing, negative, null, null and void, passed away, passed on, perished, shadowy, tenuous, ungrounded, unreal, unsubstantial, vacant, vague, vaporous, void, without foundation, absent, bad, barren, characterless, imaginary, ineffective, inefficacious, inoperative, invalid, negative, nonexistent, nothing, powerless, unavailing, unreal, unsanctioned, useless, worthless, artificial, delusive, false, fictitious, fictive, figmental, hallucinatory, immaterial, impalpable, insincere, insubstantial, intangible, invented, misleading, mock, nebulous, nonexistent, notional, ostensible, phantasmagoric, pretended, reachy, sham, suppositious, supposititious, theoretical, unbelievable, unsubstantial, fabricated, fairy-tale, false, fictitious, imaginary, invented, pretended, supposititious, unreal, untrue
Yea I Know, there is a few repeats in there!
About Me
Pages
Search This Blog
A place to post mostly Guitar related stuff. Mods, Customization, Hot Rodding, Schematics, Wiring Diagrams, Ground up builds, Amps & Other Ideas
Squier, Master Series, Esprit
My #1 Crimson Transparent [Can't Stop Playing This Guitar]
Squier, Avril lavigne, Telecaster
Single Humbucking Tele What all of the SHPR-1 Wiring diagrams are for.
Monday, April 2, 2012
Friday, July 22, 2011
Saturday, July 9, 2011
Peavey, PC1600X, PC-1600X, PC 1600X, Midi Command Station, Firmware, EPROM

This Should Open In A New Window As A "Much Larger Picture"
*************************************************************************************
An open letter to any and all Peavey PC1600X Users.
HELP !!!
I am looking for Version 2.30.
"Peavey", "PC1600X", PC-1600X", "PC 1600X", "MIDI Command Station"
Please eMail Me
*************************************************************************************
GWBlaine (at) gmail (.) com
*************************************************************************************
Peavey, PC1600X, PC-1600X, PC 1600X, Midi Command Station
*************************************************************************************
Tuesday, July 5, 2011
eBay Vendors, eBay Sellers
eBay Vendors, eBay Sellers, and Other Assorted "On Line" Vendors
---
"On Line", "On-Line", "OnLine" Vendors
"On Line", "On-Line", "OnLine" Sellers
---
No Customer Relations and/or People skills.
---
Seems most of them would rather tell you to "F-Off".
i.e. eBay vendor, made a "Best Offer" on Friday July 1st.
eBay states: 48 hour response time.
48 Hours Later: Nothing, Nada, Diddly Squat.
Emailed a 2nd time, asking about "Best Offer"
His response was basically "F-Off", It's a holiday
You are selling via an "On Line" venue that is "Open 24-7".
You could not take 5 minutes out of your day to check your emails?.
---
My response was:
Well Hello To You To, Goodbye Forever
-----------------------------------------------
If you are going to be on the "Back Side Of Nowhere"
At least have your email "Auto Respond"
"I'm Out Of It", "OTL till further notice", "Whatever"
---
Or, My All Time Favorite "F-Off" I don't need your business.
---
This is not the first "Vendor" to give me this response.
What ???
People have no "Manners or Common Courtesy" ???
How about respect for your "Possible Customer"
---
My guess is that being an Internet business.
And so far removed from being human.
That "Being Nice" does not apply.
---
Yes, I may be the "A-hole From Hell".
But !!!!!
I am "Spending Money"
You only have to deal with me for a short while.
Probably less that a half of an Hour, One Hour Tops.
Once you get my money, you can call me all sorts on names.
To my face or otherwise.
If to my Face, I will never shop your establishment ever again.
---
But to insult me before I have even made a purchase, seems kinda silly to me.
To insult me while making an enquiry about "Price" or "whatever" my question may be.
Talk about "Shooting Yourself in the Foot".
"I Will Post" About You
"I Will Tell My Friends" About You.
To Boycott, Avoid, Do Not Buy from This "Ever So Happy, Happy, Happy Person"
Or just go to this web site, Web Page and see for yourself.
Apparently they do not need mine or your business!
---
Does being an On Line Vendor mean you do not have to treat potential customers with respect or dignity?
If you had a "Physical Store" I could shop in?
Would you treat me this way, or tell me to get the "F" out of your store.
If all I did was ask a question about the "Item"
Or if you would take a lower price for said "Item"
Every "Store" I have ever been in it has been 50/50.
They would "Bargain"with me or say "Sorry" I cannot do that.
Please Note The "Sorry" Part !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
---
!!! Not A Single One Of Them Has Ever Told Me To "F-Off" !!!
=====================================================================================
A#1 --- Let me say that:
I am not pissed off or mad in any way.
Well, not as much as I used to be anyway!
This has happened so often that it has lost it's shock value.
BUT!
I am still Amazed that these people are still in business.
I doubt any of them get repeat business.
---
My Background in Customer Service.
#1. I grew in a Family Restaurant, 20 Years.
Where I was taught at a very young age how to deal with customers both Good and Bad.
I can only recall where one customer physically attacked me, for that I called the Police.
That one person was banned from ever coming into the restaurant ever again.
#2. 10 Years in Tech Support, Answering phones.
99% of the callers were anywhere from mildly upset,
TO SO F-ing mad I though their heads were going to Explode.
The last 1% were apologizing for calling in.
I had to be "Courteous" to each and every one of them.
For me this was not a problem, I only had to deal with them long enough to get their problem "Fixed"
At least for me it was not personal.
---
I cannot attest to what is going on.
But my take on what I see around me is that "Someone" with a "Day Job"
Decided to go into business for themselves.
That is all very fine!
But of those I have dealt with on a personal level.
Did not have a clue as to what "Customer Service" was or what it meant.
I suppose they were nice enough people, still when things did not go as they wished.
They got Mad.
Fine get mad, just do not take it out on your customers, Past, Present or Future.
A Shop out of the Back Bedroom, Back Porch, Garage, Tool Shed Out Back.
Do not know, Do not Care.
Please read a book, Take a class, Surf the Net for how to Make & Keep Happy Customers.
Please and Thank You.
---
---
"On Line", "On-Line", "OnLine" Vendors
"On Line", "On-Line", "OnLine" Sellers
---
No Customer Relations and/or People skills.
---
Seems most of them would rather tell you to "F-Off".
i.e. eBay vendor, made a "Best Offer" on Friday July 1st.
eBay states: 48 hour response time.
48 Hours Later: Nothing, Nada, Diddly Squat.
Emailed a 2nd time, asking about "Best Offer"
His response was basically "F-Off", It's a holiday
You are selling via an "On Line" venue that is "Open 24-7".
You could not take 5 minutes out of your day to check your emails?.
---
My response was:
Well Hello To You To, Goodbye Forever
-----------------------------------------------
If you are going to be on the "Back Side Of Nowhere"
At least have your email "Auto Respond"
"I'm Out Of It", "OTL till further notice", "Whatever"
---
Or, My All Time Favorite "F-Off" I don't need your business.
---
This is not the first "Vendor" to give me this response.
What ???
People have no "Manners or Common Courtesy" ???
How about respect for your "Possible Customer"
---
My guess is that being an Internet business.
And so far removed from being human.
That "Being Nice" does not apply.
---
Yes, I may be the "A-hole From Hell".
But !!!!!
I am "Spending Money"
You only have to deal with me for a short while.
Probably less that a half of an Hour, One Hour Tops.
Once you get my money, you can call me all sorts on names.
To my face or otherwise.
If to my Face, I will never shop your establishment ever again.
---
But to insult me before I have even made a purchase, seems kinda silly to me.
To insult me while making an enquiry about "Price" or "whatever" my question may be.
Talk about "Shooting Yourself in the Foot".
"I Will Post" About You
"I Will Tell My Friends" About You.
To Boycott, Avoid, Do Not Buy from This "Ever So Happy, Happy, Happy Person"
Or just go to this web site, Web Page and see for yourself.
Apparently they do not need mine or your business!
---
Does being an On Line Vendor mean you do not have to treat potential customers with respect or dignity?
If you had a "Physical Store" I could shop in?
Would you treat me this way, or tell me to get the "F" out of your store.
If all I did was ask a question about the "Item"
Or if you would take a lower price for said "Item"
Every "Store" I have ever been in it has been 50/50.
They would "Bargain"with me or say "Sorry" I cannot do that.
Please Note The "Sorry" Part !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
---
!!! Not A Single One Of Them Has Ever Told Me To "F-Off" !!!
=====================================================================================
A#1 --- Let me say that:
I am not pissed off or mad in any way.
Well, not as much as I used to be anyway!
This has happened so often that it has lost it's shock value.
BUT!
I am still Amazed that these people are still in business.
I doubt any of them get repeat business.
---
My Background in Customer Service.
#1. I grew in a Family Restaurant, 20 Years.
Where I was taught at a very young age how to deal with customers both Good and Bad.
I can only recall where one customer physically attacked me, for that I called the Police.
That one person was banned from ever coming into the restaurant ever again.
#2. 10 Years in Tech Support, Answering phones.
99% of the callers were anywhere from mildly upset,
TO SO F-ing mad I though their heads were going to Explode.
The last 1% were apologizing for calling in.
I had to be "Courteous" to each and every one of them.
For me this was not a problem, I only had to deal with them long enough to get their problem "Fixed"
At least for me it was not personal.
---
I cannot attest to what is going on.
But my take on what I see around me is that "Someone" with a "Day Job"
Decided to go into business for themselves.
That is all very fine!
But of those I have dealt with on a personal level.
Did not have a clue as to what "Customer Service" was or what it meant.
I suppose they were nice enough people, still when things did not go as they wished.
They got Mad.
Fine get mad, just do not take it out on your customers, Past, Present or Future.
A Shop out of the Back Bedroom, Back Porch, Garage, Tool Shed Out Back.
Do not know, Do not Care.
Please read a book, Take a class, Surf the Net for how to Make & Keep Happy Customers.
Please and Thank You.
---
Saturday, February 6, 2010
Squier, Avril lavigne, Telecaster
Squier, Avril lavigne, Telecaster
What all of the SHPR-1, P-Rails, Hot Lead wiring diagrams are for.
I have all ways wanted a Single Humbucker guitar.
I had never heard of Avril Lavinge!
Untill I started searching for a '69 Tele Thineline.
This little bugger caught my eye.
That "Silly Pickguard' has got to go.
I'll Swap it out for a "Black Pearl" Esquire pickguard from WD Msic.
The Tone (Noise Canceling) Coil:
Is going under the pickguard right in front of the Lead pickup.
The body will have to be routed out for the Tone Coil.
The Tone Coil route cavity should be shielded.
The Tone Coil should be darn near touching the back of the pickguard.
The pickguard should have !-!-!_NO_!-!-! shielding on it.
Aluminum, Copper, Spray on, or other wise.
*************************************************************************

*************************************************************************
Other Mods: Maybe?
1... Black Bridge (Hip Shot).
2... Black Tuners.
3... Black Control Plate.
4... Move Output Jack around back with a "Strat" Recessed Jack Plate.
5... Black "Beauty Ring" around Pickup.
--- As I play "Right On Top" of the Bridge pickup.
--- This will keep me from destroying the pickup.
--- I have done so in the past.
--- As I have used these before.
--- they do not affect the sound as much as you would think.
--- because of the "Open Face" design.
*************************************************************************

*************************************************************************

*************************************************************************

****************************************************************************
What all of the SHPR-1, P-Rails, Hot Lead wiring diagrams are for.
I have all ways wanted a Single Humbucker guitar.
I had never heard of Avril Lavinge!
Untill I started searching for a '69 Tele Thineline.
This little bugger caught my eye.
That "Silly Pickguard' has got to go.
I'll Swap it out for a "Black Pearl" Esquire pickguard from WD Msic.
The Tone (Noise Canceling) Coil:
Is going under the pickguard right in front of the Lead pickup.
The body will have to be routed out for the Tone Coil.
The Tone Coil route cavity should be shielded.
The Tone Coil should be darn near touching the back of the pickguard.
The pickguard should have !-!-!_NO_!-!-! shielding on it.
Aluminum, Copper, Spray on, or other wise.
*************************************************************************

*************************************************************************
Other Mods: Maybe?
1... Black Bridge (Hip Shot).
2... Black Tuners.
3... Black Control Plate.
4... Move Output Jack around back with a "Strat" Recessed Jack Plate.
5... Black "Beauty Ring" around Pickup.
--- As I play "Right On Top" of the Bridge pickup.
--- This will keep me from destroying the pickup.
--- I have done so in the past.
--- As I have used these before.
--- they do not affect the sound as much as you would think.
--- because of the "Open Face" design.
*************************************************************************

*************************************************************************

*************************************************************************

****************************************************************************
A Variable, Switchable, Tone/Noise Canceling Coil
+%5Brev-005I(1).png)
*********************************************
P1 = Seymour Duncan SHPR-1 (P-Rails)
*********************************************
R1 = Volume, Audio Taper, (Shunt Circuit)
R2A, R2B = Tone, Linear Taper
R3A, R3B = Blender, Audio Taper
--- Shunt Circuit for Variable Tone/Noise Canceling Coil "TC1"
--- R3A is wired up "Clockwise"
--- R3B is wired up "Counter Clockwise"
*********************************************
TC1 = Dual, 10K Coil
--- Humbucker pickup without magnet(s).
--- It does have the "Slugs & Screws" installed
*********************************************
S1 = Coil Select
--- Single, Humbucker, Single
--- South Coil(P90), Both Coils, North Coil(Blade)
S2 = Pickup, Series-Parallel
S3 = Tone Coil, On-Off
S4 = Tone Coil, Series/Parallel
*********************************************
This setup give you 3-Pots and 4-switches.
R1 & R2 are standard pots with standard sized knobs.
S2 & S2 are large "Fat Bat" switches.
R3A&B is a Mini Pot with Mini Knob.
S3 & S4 are "Mini" toggle switches.
*********************************************
Wednesday, January 27, 2010
Variable, Switchable, Tone/Noise Canceling Coils (rev-001B)

*********************************************
P1 = Seymour Duncan SHPR-1 (P-Rails)
*********************************************
R1 = Volume, Audio Taper, (Shunt Circuit)
R2A, R2B = Tone, Linear Taper
R3A, R3B = Blender, Audio Taper
--- Shunt Circuit for Variable Tone/Noise Canceling Coil "TC1"
--- R3A is wired up "Clockwise"
--- R3B is wired up "Clockwise"
*********************************************
TC1 = 10K Coil
--- Single coil pickup without a magnet
--- It does have the "Nickle Slugs/Nickle Bar" installed
TC2 = 10K Coil
--- Single coil pickup without a magnet
--- It does have the "Nickle Slugs/Nickle Bar" installed
*********************************************
S1 = Coil Select
--- Single, Humbucker, Single
--- South Coil(P90), Both Coils, North Coil(Blade)
S2 = Pickup, Series-Parallel
S3 = Tone Coil, On-Off
*********************************************
This setup give you 3-Pots and 2-switches.
R1 & R2 are standard pots with standard sized knobs.
S2 & S2 are large "Fat Bat" switches.
R3A&B is a Mini Pot with Mini Knob.
S3 & S4 are "Mini" toggle switches.
*********************************************
Tuesday, January 26, 2010
A Single, Variable, Switchable, Tone/Noise Canceling Coil (rev-0004A)

*********************************************
P1 = Seymour Duncan SHPR-1 (P-Rails)
*********************************************
R1 = Volume, Audio Taper, (Shunt Circuit)
R2A, R2B = Tone, Linear Taper
R3A, R3B = Blender, Audio Taper
--- Shunt Circuit for Variable Tone/Noise Canceling Coil "TC1"
--- R3A is wired up "Clockwise"
--- R3B is wired up "Counter Clockwise"
*********************************************
TC1 = 10K Coil
--- Single coil pickup without a magnet
--- It does have the "Nickle Slugs/Nickle Bar" installed
*********************************************
S1 = Coil Select
--- Single, Humbucker, Single
--- South Coil(P90), Both Coils, North Coil(Blade)
S2 = Pickup, Series-Parallel
S3 = Tone Coil, On-Off
S4 = Tone Coil, Series/Parallel
*********************************************
This setup give you 3-Pots and 4-switches.
R1 & R2 are standard pots with standard sized knobs.
S2 & S2 are large "Fat Bat" switches.
R3A&B is a Mini Pot with Mini Knob.
S3 & S4 are "Mini" toggle switches.
*********************************************
Tuesday, January 12, 2010
Variable Tone Coils With Variable Noise Canceling Coil - redux

Seymour Duncan SHPR-1 (P-Rails)
R1A, R1B = Volume, Shunt Circuit
R2A, R2B = Tone
R3 = Blender, Shunt Circuit for Variable Noise Canceling Coil SC1
R4A, R4B = Blender for Variable Tone Coils TC1 & TC2
S1 = Single, Humbucker, Single (South Coil=P90, Both Coils, North Coil=Blade)
S2 = Series-Parallel
*********************************************
Gemini, Pro Audio, DJ Equipment
Hello All.
A Review.
Gemini PA-7000 Preamp
This is not so much of a review of the PA-7000 Preamp as it is of Gemini the company.
To make a long story short, I got took on ebay.
The Person advertised the PA-7000 as "Used", but never taken out of the box.
"As Is", No Returns He says, well that should have been a clue.
A deal to good to pass up, I should have Passed.
Seems He palmed off his shipping damage to who ever bought it, Me.
Oh Well, live & learn.
**********************************
eBay page states that the item will be shipped via "UPS"
It arrived via the US Postal Service, uninsured.
Received 9 days later.
It arrived in it's "Paper Box"
Wrapped in a "Brown Grocery Bag"
The Bag was torn in several places.
The "Paper Box' was "Crushed' and had several "Holes" in it.
**********************************
My Day Job: Electronics Technician
**********************************
Removed the PA-7000 from the Box.
Removed the PA-7000 from the Plastic Bag.
Inspecting the PA-7000, From Left to Right:
1. The Faceplate:
Has several very slight "Warps" to it, both "In & Out"
It also has a few "Nicks" in it along the top edge.
2. The Power Switch:
Looks Ok, it Toggles.
3. The Phono Jack;
Looks Ok.
4. The Microphone Jack:
Looks Ok.
5. The Mic Level Knob:
Has the paint scuffed off on one edge.
6. The Bass Knob:
Has a deep gouge in it and was pushed all the way down making contact with the Faceplate and would not turn.
7. The Mid Knob:
Has a deep gouge in it and was pushed "Up" the top edge of the knob making contact with the Faceplate and would not turn. The bottom edge of the knob in contact with the Faceplate was Flatted and bent under.
8. The Treble Knob:
Has a scuffed up Face with missing paint, but will turn.
9. The Balance Knob:
Looks Ok, and turns.
10 The Volume Knob:
Has a scuffed up Face with missing paint, but will turn.
11, 12, 13, 14. The Mono, Mute, Low Cut and Loudness Buttons:
All look Ok, all push in & out.
15. The Selector Knob:
Looks Ok, and turns.
16. The Tape Monitor button:
Looks Ok, and pushes in & out.
**********************************
Put the PA-7000 on the work bench.
Pulled all of the knobs off.
Removed the nuts holding the potentiometers.
Removed the faceplate, left the power switch in the Faceplate.
Hooked it up to my test equipment.
The PA-7000 Powers Up & Down OK.
Ran a sweeping wave (1KHz to 100KHz) @1Vp-p
Tested all inputs.
Tested all outputs.
Output looks good on the Scope.
I get the "Sweeping Buzz" from the loudspeakers.
--- * --- * ---
The Mid knob:
The collar that the control shaft goes through is bent "UP"
And will only turn to the left (Counter-Clock Wise).
In so much as it does turn, it still has an effect on the audio signal.
But needs to be replaced.
The circuit on the board proper seems to be OK and working.
The "HIT" on the knob does not seem to have made it into the chassis.
And does not seem to have "Damaged" the board itself.
--- * --- * ---
The Rest Of The Controls:
All seem to be working on the bench.
Once I replace the "Mid' potentiometer.
I will have to run a "Real" audio signal through it as a final test.
All Of The Knobs Will Have To Be Replaced.
The "Mid' knob Is ruined (busted).
The rest of the knobs have cosmetic issues.
------------------------------------------------------------------------------------------------
Replaced Mid knob.
Hooked up mu MP3 player to the PA-7000 to each input.
All inputs working, all outputs working.
Overall build quality of the circuit board was not all that impressive.
As a preamp the PA-7000 seems to be a somewhat useable piece of equipment.
------------------------------------------------------------------------------------------------
And here is the rub !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have emailed Gemini 3 times, Absolutely no response!!!!!!!!!!!!!!!!!!!!!
All I wanted to know was if they would sell me some new knobs.
Or tell me where I could get the knobs.
I emailed Sales.
I emailed Tech support, twice.
Nada, Diddly Squat, Nope, Nothing, A Bunch of Deader's.
Sure does not inspire any warm and fuzzy feelings about Gemini.
I know I will never purchase any Gemini products again.
*******************************************************************************
A Review.
Gemini PA-7000 Preamp
This is not so much of a review of the PA-7000 Preamp as it is of Gemini the company.
To make a long story short, I got took on ebay.
The Person advertised the PA-7000 as "Used", but never taken out of the box.
"As Is", No Returns He says, well that should have been a clue.
A deal to good to pass up, I should have Passed.
Seems He palmed off his shipping damage to who ever bought it, Me.
Oh Well, live & learn.
**********************************
eBay page states that the item will be shipped via "UPS"
It arrived via the US Postal Service, uninsured.
Received 9 days later.
It arrived in it's "Paper Box"
Wrapped in a "Brown Grocery Bag"
The Bag was torn in several places.
The "Paper Box' was "Crushed' and had several "Holes" in it.
**********************************
My Day Job: Electronics Technician
**********************************
Removed the PA-7000 from the Box.
Removed the PA-7000 from the Plastic Bag.
Inspecting the PA-7000, From Left to Right:
1. The Faceplate:
Has several very slight "Warps" to it, both "In & Out"
It also has a few "Nicks" in it along the top edge.
2. The Power Switch:
Looks Ok, it Toggles.
3. The Phono Jack;
Looks Ok.
4. The Microphone Jack:
Looks Ok.
5. The Mic Level Knob:
Has the paint scuffed off on one edge.
6. The Bass Knob:
Has a deep gouge in it and was pushed all the way down making contact with the Faceplate and would not turn.
7. The Mid Knob:
Has a deep gouge in it and was pushed "Up" the top edge of the knob making contact with the Faceplate and would not turn. The bottom edge of the knob in contact with the Faceplate was Flatted and bent under.
8. The Treble Knob:
Has a scuffed up Face with missing paint, but will turn.
9. The Balance Knob:
Looks Ok, and turns.
10 The Volume Knob:
Has a scuffed up Face with missing paint, but will turn.
11, 12, 13, 14. The Mono, Mute, Low Cut and Loudness Buttons:
All look Ok, all push in & out.
15. The Selector Knob:
Looks Ok, and turns.
16. The Tape Monitor button:
Looks Ok, and pushes in & out.
**********************************
Put the PA-7000 on the work bench.
Pulled all of the knobs off.
Removed the nuts holding the potentiometers.
Removed the faceplate, left the power switch in the Faceplate.
Hooked it up to my test equipment.
The PA-7000 Powers Up & Down OK.
Ran a sweeping wave (1KHz to 100KHz) @1Vp-p
Tested all inputs.
Tested all outputs.
Output looks good on the Scope.
I get the "Sweeping Buzz" from the loudspeakers.
--- * --- * ---
The Mid knob:
The collar that the control shaft goes through is bent "UP"
And will only turn to the left (Counter-Clock Wise).
In so much as it does turn, it still has an effect on the audio signal.
But needs to be replaced.
The circuit on the board proper seems to be OK and working.
The "HIT" on the knob does not seem to have made it into the chassis.
And does not seem to have "Damaged" the board itself.
--- * --- * ---
The Rest Of The Controls:
All seem to be working on the bench.
Once I replace the "Mid' potentiometer.
I will have to run a "Real" audio signal through it as a final test.
All Of The Knobs Will Have To Be Replaced.
The "Mid' knob Is ruined (busted).
The rest of the knobs have cosmetic issues.
------------------------------------------------------------------------------------------------
Replaced Mid knob.
Hooked up mu MP3 player to the PA-7000 to each input.
All inputs working, all outputs working.
Overall build quality of the circuit board was not all that impressive.
As a preamp the PA-7000 seems to be a somewhat useable piece of equipment.
------------------------------------------------------------------------------------------------
And here is the rub !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have emailed Gemini 3 times, Absolutely no response!!!!!!!!!!!!!!!!!!!!!
All I wanted to know was if they would sell me some new knobs.
Or tell me where I could get the knobs.
I emailed Sales.
I emailed Tech support, twice.
Nada, Diddly Squat, Nope, Nothing, A Bunch of Deader's.
Sure does not inspire any warm and fuzzy feelings about Gemini.
I know I will never purchase any Gemini products again.
*******************************************************************************
Friday, December 4, 2009
Four Pole, Four Throw (4P4T) Rotary Switch

Lead:
2 GFS L'Killers @15K each
4P4T Rotary Switch on the lead pickup with a Phase Switch
2 Series/Parallel Switches
Rythm:
1 Seymour Duncan SHPR-1 P-Rail
1 South-Coil/Humbucker/North-Coil Switch
1 Series/Parallel Switch
Variable Tone Coils
Variable Noise Canceling Coil
Output:
Stereo TRS Jack
DP3T On-On-On Pickup Select Switch
Stereo-Mono Switch With Transformer Coupled Output
Variable Tone Coils With Variable Noise Canceling Coil
Subscribe to:
Posts (Atom)
GNX4
You Gotta Get This !!!
The SuperL
Schematic
SuperL Installed W/L-500
Schematic
More Detail #1
On/On/On Switch & Jacks
On/On/On Switch
stewmac.com
SuperL Bits & Pieces
2 Dual Blade Single-Buckers
Zoom G9.2tt
My Next G.A.S. Attack


